Menu
My Cart | Checkout

 
 
← Go Back

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP
New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

Price: $197.99

Buy Now Add to Cart

Description:
The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.

- It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
- Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
- Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
- Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
- Super easy few step setup and glue free assemble.
- Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
- And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers.


Specification:
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
2.4Ghz 6-Channels(Not Included)
Receiver Not Included
11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Flaps: Yes
Retracts: No
19*24.5*106 cm


Key Features:
Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction


FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 


EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.


EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.


SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.


GRADIENTER PREINSTALLED
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.


VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.

Package Included:
1 x Volantex Ranger EX 757-3 RC Airplane PNP




Others Also Viewed these Popular Items...View All Products

Realacc Aluminum Suitcase Carrying Case for Syma X8C X8G X8W X8HC X8HW X8HG RC Quadcopter

Realacc Aluminum Suitcase Carrying Case for Syma X8C X8G X8W X8HC X8HW X8HG RC Quadcopter

Description:
Item Name: 
Aluminum Suitcase Carrying Case Box
Dimensions: About **cm
Weight: About 2000kg
Usage: For Protecting Syma 
X8C X8G X8W RC Quadcopter

Features:

With strong high density foam to keep your quadcopter secure.
Sufficient capacity, very useful and convenient to use.

Make your outdoor flying more comfortable and convenient.


Package Included:

1 x Aluminum Suitcase

Read More


Price: $26.39

Buy Now Add to Cart

4500mAh 15.2V 4S Intelligent Battery For DJI Phantom 3 Professional Advance Standard Versions

4500mAh 15.2V 4S Intelligent Battery For DJI Phantom 3 Professional Advance Standard Versions
Description:
Item Name: Intelligent Flight Battery
Capacity: 4500mAh
Battery Type: LiPo 4S
Voltage: 15.2V
Energy: 68.4Wh
Flight time: up to 23 minutes
Operating Temperature: 0C to 40C
Maximum charging electric power: 100W
Battery weight: 375g
For DJI Phantom 3 RC Quadcopter
Read More


Price: $83.59

Buy Now Add to Cart

2x7.4V 2700mAh 10C Original Battery For Hubsan H501S H501C X4 RC Quadcopter

2x7.4V 2700mAh 10C Original Battery For Hubsan H501S H501C X4 RC Quadcopter
Description:
Brand Name: Hubsan
Item No.: H501S
Item Name: Battery
Voltage: 7.4V
Capacity: 2700mAh 
Power:10C 
Energy: 17.02Wh
Maximum charging power:7.4W
Dimension:10.4*3.35*1.6cm
Weight: about 210g
Charging time: About 150mins
Usage: for Hubsan H501S X4 RC Quadcopter
 
Package Included:
2 x Battery
Read More


Price: $35.19

Buy Now Add to Cart

Mini Servo Tester 4.8V to 6.0V STV2.3 BEC Tester

Mini Servo Tester 4.8V to 6.0V STV2.3 BEC Tester

Description:

Size: 23.5×42×28mm.
Weight: 8g (0.28 oz)
Input: DC 4.8 to 6.0V
Output signal: 1.5ms±0.5ms
Adjustment methods: manual, neutral, automatic.

Features:

1.A must have for all RC hobbies, allows the user to test and exercise servos and set up a model without requiring the use of a transmitter and receiver.
2.The Servo Tester allows the user to control a servo directly, to determine its neutral position and to cycle it automatically for break-in and testing.
3.The Servo Tester offers small size, low power, high reliability and easy operation.
4.It is easy to use, practical and can test most parameters that interest users.
5.Controlled by an SCM, it has good stability and high accuracy.
6.The Servo Tester is adaptable to different power sources, it can use a four-cell dry battery, NiCd or NiMH pack,or it can be connected directly to a UBEC or ESC.

Color may vary, randomly sent

Package Includes:

1 x Servo Tester

Read More


Price: $6.15

Buy Now Add to Cart