Menu
My Cart | Checkout

 
 
← Go Back

X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit

X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit
X-uav Mini Talon EPO 1300mm Wingspan V-tail FPV Plane Aircraft Kit

Price: $78.64

Buy Now Add to Cart

The Mini Talon V-tail plane is the smaller version of the popular Talon Kit. The kit comes un-assembled with EPO and laser cut plywood parts.Runs 4S 14.8V 10,000mAh LIPO battery, flight times are long, and wing loading still low thanks to the generous wing area of the Talon. A generous fuselage compartment with large top hatch allows you to access your equipment and flight battery in any configuration you choose. It is a great plane for anything you want to throw at it.you can use these for site surveying, aerial mapping and FPV fun.

Description:
Brand:X-uav
Item:Mini Talon Kit
Wingspan: 1300mm
Length: 830mm
Flying Weight: 1000g-2000g
Note:Electronics Kit Supplied

Recommend Parts 
(Not Included):
6 CH FlySky Transmitter and Receiver Click Here
4S 5000mAh LiPoly Battery
4 x TowerPro 9g Servos  Click Here
3536(2814) 1000KV Brushless Motor
40A Brushless Speed Control Click Here
9x4.5 propeller Click Here

Recommend FPV System (Not Included):
APM Flight Controller Set 2.8 Click Here
Eachine 700TVL 1/3 Cmos 110 Degree Lens Camera Click Here
Skyzone FPV 5.8G 32CH 7 Inch Monitor DVR Click Here
Eachine TS832 FPV 5.8G 32CH 600mW Wireless AV Transmitter Click Here
Eachine FPV 5.8G 32CH Wireless AV Receiver RC832 Click Here

5.8G Gain Petals Clover Mushrooms Click Here

Features:
- The Mini Talon FPV V-tail Drone is the new little brother of the popular Talon FPV plane.
- Its smaller size is great for packing with you on your favorite FPV safari.
- Runs on 4S 14.8V 10,000mAh LiPoly battery, long flight times.
- Low wing loading.
- Generous fuselage compartment with large top hatch allows you to access your FPV equipment and flight battery in any configuration you choose. It is an open canvas for your FPV needs.
- Kit - All assembly and equipment installation required
- Moulded EPO airframe
- Laser cut plywood motor mount and wing saddle frame
- Mono-wheel landing gear protects bottom of fuselage
- Large fuselage compartment accommodates many battery and equipment configurations.
- Two Piece plug in wings with carbon wing tube

Note:
Kit only, does not include motor/ESC/Servos.
The LY-T08-11 Carbon Rod Fastener is installed on the wing,the LY-T08-12 Wire Line is not included.


Package Included:
1 x X-uav Mini Talon RC Kit




Others Also Viewed these Popular Items...View All Products

Tarot T4-3D Dual Shock Absorber 3 Axis Gimbal PTZ for Gopro Hero4 3+ 3 FPV Quadcopter TL3D02

Tarot T4-3D Dual Shock Absorber 3 Axis Gimbal PTZ for Gopro Hero4 3+ 3 FPV Quadcopter TL3D02
Description:
Brand Name: Tarot
Item Name: T4-3D 3 Axis Gimbal
Item NO.:TL3D02 
Input power: LiPo 2S~6S battery
Angle control accuracy: + 0.02
Maximum controllable speed:
Pitch direction (TILT): + 200 degree /s
Controllable rotation range
Pitch direction (TILT):-120 degrees to +15 degrees
Working current: 30mA (@25V) 50mA (@12V)
Locked rotor current: 350mA (@25V) 700mA (@12V)
Working environment temperature: -20 degrees ~50 C degrees C
Weight: 201g
Size: 100mm * 88.5mm * 105.6mm
Software installation requirements: XP Windows; VISTA Windows; Windows 7; 8 (32 or 64 bit); Windows;
 
 
Features:    
Support computer operation interface settings
Direction following  mode (PF)
First person mode (FPV)
Built in independent IMU module
TAROT special PTZ servo drive module
AV output interface
Wide range voltage input support
Support for conventional receiver /S-Bus receiver /DSM receiver
Peripheral equipment:
Support camera type: HERO3/HERO4 GOPRO and camera of the same size
 
 
Packge Included:
1 x Gimbal
1 x Control Module 
1 x Connection Cable 
1 x 5V Output AV Cable
1 x USB Module  
1 x Flight Control Cable  
Read More


Price: $107.79

Buy Now Add to Cart

Eachine 3.7V 200mah 30C Lipo Upgrade Battery for Blade Inductrix Tiny Whoop RC Quadcopter

Eachine 3.7V 200mah 30C Lipo Upgrade Battery for Blade Inductrix Tiny Whoop RC Quadcopter

Description:
Brand Name: Eachine
Item Name: Lipo Battery
Capacity: 3.7V 200mah 30C
Size: 50.10*11*6mm
Weight: 6g
Wire length: 32.45mm
Flight time: About 8 minutes
Charging time: About 60 minutes
Usage: for Blade Inductrix Tiny Whoop RC Quadcopter

Package Included:
1 x 3.7V 200mah Battery

Read More


Price: $5.48

Buy Now Add to Cart

Hubsan H501S X4 RC Quadcopter Spare Parts 7.4V 2700mAh 10C Original Battery H501S-14

Hubsan H501S X4 RC Quadcopter Spare Parts 7.4V 2700mAh 10C Original Battery H501S-14

Description:
Brand Name: Hubsan

Item No.: H501S-14
Item Name: Battery
Voltage: 7.4V
Capacity2700mAh 
Power:10C 
Energy: 17.02Wh
Maximum charging power:7.4W
Weight: 105g
Charging time: About 150mins(Charging current is 1A)
Usage: for Hubsan H501S H501C X4 RC Quadcopter

Package Included:
1 x Battery

Read More


Price: $32.99

Buy Now Add to Cart

Eachine E100 100mm Carbon Fiber DIY Micro FPV RC Quadcopter Frame Support 720/820 Coreless Motor

Eachine E100 100mm Carbon Fiber DIY Micro FPV RC Quadcopter Frame Support 720/820 Coreless Motor

Description:

Brand Name: Eachine
Item NO.: E100
Item name: DIY Mini Quadcopter Frame Kit
Material: Carbon Fiber
Wheelbase: 100mm
Thickness:1mm
Motor: 720/820 Coreless motor
Propeller size: 30mm
Aluminum Posts Size: M2*18
Bare weight: 6.65g (Motor not included)
Size: L85mm x W85mm x H20mm

Features:

• Small wheelbase 100mm,very small brushed motors can be utilized as the power source with small 30mm propellers.
• The carbon fiber board is 1mm thickness. The kit comes with red CNC aluminum posts.
• On these the top plate is fitted with an extra plate added to fit you FPV camera.
• Lightweight about 7g.
• Rubber motor mounts to ease vibration

Required (package not include):
4 x 720 / 820 Coreless motor
4 x 30mm Propeller (2CW & 2CCW)
1 x 250~950mAh 1S LiPo Battery
1 x Flight Controller

Package included:
1 x Eachine 100mm Frame Kit

Read More


Price: $8.79

Buy Now Add to Cart