Menu
My Cart | Checkout

 
 
← Go Back

Outfield 30W 11.1V Hot Melt Glue Gun For RC Models Without Indicator

Outfield 30W 11.1V Hot Melt Glue Gun For RC Models Without Indicator
Outfield 30W 11.1V Hot Melt Glue Gun For RC Models Without Indicator

Price: $7.66

Buy Now Add to Cart

Description:
Item Name: Glue gun
Power: 30w
Voltage: 11.1v(can be connected to lipo battery directly)

Usage: Used with 7mm small glue sticks
Plug type:T Plug

Features:

Small and easy to carry
Fast heating,safety in use
Can be used in the outfield

Package Included:
1x 30W glue gun




Others Also Viewed these Popular Items...View All Products

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP
Description:
The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.

- It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
- Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
- Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
- Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
- Super easy few step setup and glue free assemble.
- Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
- And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers.


Specification:
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
2.4Ghz 6-Channels(Not Included)
Receiver Not Included
11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Flaps: Yes
Retracts: No
19*24.5*106 cm


Key Features:
Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction


FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 


EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.


EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.


SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.


GRADIENTER PREINSTALLED
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.


VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.

Package Included:
1 x Volantex Ranger EX 757-3 RC Airplane PNP

Read More


Price: $197.99

Buy Now Add to Cart

JJRC X1 With Brushless Motor 2.4G 4CH 6-Axis RC Quadcopter RTF

JJRC X1 With Brushless Motor 2.4G 4CH 6-Axis RC Quadcopter RTF

Description:
Brand Name: JJRC
Item NO.: X1
Item name: RC Quadcopter
Frequency: 2.4G
Gyro: 6 axis
Material: ABS
Size: 21*21*11cm
Color: Green, Blue
Motor: D1806-2280KV brushless motor
Flight time: about 15 minutes
Charging time: 90 minutes
Control distance: about 300-400M
Battery for quadcopter: 7.4V 1300mah Li Battery (included)
Battery for transmitter: 4 x 1.5V AA battery (not included)
Suitable FPV:Syma X5C-1 X5SC 5.8G FPV 720P Camera with Monitor

 


Features:
With brushless motor, the D1806 - 2280KV provides strong power to the quadcopter.
Large 7.4V 1300mA capacity battery ensures the strong power, Superior 15mins long flight time.
It has 6-axis gyro which can have more stable flying and be easy to control.
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly.
With highlight LED lights, make it more dazzle beautiful and colorful night light.
Idle speed adjustment / stop expansion, rudder volume switch
Lightweight airframe with nice durability
Function: Up/down/left/right/side flight/ fine-tuning/aileron elevator/ rudder 3 rate switch/aileron trim/idle trim and stop/360 rollover.

Package Included:
1 x JJRC X1 RC Quadcopter
1 x Transmitter
1 x Battery
1 x Charger
4 x spare blades
4 x protection cover
2 x Landing gear
1 x Manual

Read More


Price: $109.98

Buy Now Add to Cart

Realacc Motor Grip Pliers For RC Models

Realacc Motor Grip Pliers For RC Models

Description:
Brand Name: Realacc
Item Name: Motor Grip Pliers
Maximum opening: 37mm
Weight: 63g

Features:
Designed to grip the can of your electric motor.
Silicon inserts help prevent scratching and allow you to get a better grip of your prop nut/spinner making removal of your propeller far easier.
Can be used on any round object that needs gripping such as print heads on 3D printers, carbon fiber or aluminium tubes or even hold the handle of a driver to get more leverage.

Package Included:
1x Realacc Motor Grip Pliers

Read More


Price: $9.89

Buy Now Add to Cart

Walkera G-2D Brushless Gimbal For iLook/GoPro Hero 3 Camera on Walkera QR X350 Pro RC Quadcopter Spare Parts

Walkera G-2D Brushless Gimbal For iLook/GoPro Hero 3 Camera on Walkera QR X350 Pro RC Quadcopter Spare Parts
Description:
Operating voltage: recommended
12V,3S Lipo battery)
Opetating current: 200mA-500mA(depends on the motor power and voltage supplied)
Opetating temperature: -15?-65?
Sensor technology: 3-axis MEMS gyro and accelerometer
Max angular rate: 2000/sec
Max acceleration: 16g
Frenquency: 2000Hz
Motor driven frequency: 46 KHz(no noise smoothing drive)
Control accuracy: 0.1
Control range: -45-45(roll)/-135-90(tilt)
Size: 105mm * 95mm * 95mm(L*W*H)
Weight: 120g(Camera not included)
Program online update available
(UP02 and UP02 adaptor requested)
Package size: 15 * 12 * 9cm / 5.9 * 4.7 * 3.6in
Package weight: 267g / 9.4oz

Features:
iLook,iLook+,Gopro 3 camera AV line out
Power voltage compensation available
High precision,hyper stable designed for aerial photographers extraordinarily
Designed in high intensive, light and agility,easy to use support super stable aerial photography.
Support iLook/Gopro Hero 3
Support 350 size and above drones to shooting videos.
Support motor drive side short circuit protection
Support initial roll and tilt customed
Support stick rate mode and position mode
Regular receiver accepted

Package included:
1 X Walkera White G-2D Brushless Gimble
3 X Cables
1 X Install Fittings
1 X Instruction Manual

Read More


Price: $70.39

Buy Now Add to Cart