Resolution : 2304x1536,1920x1080, 1280x720 TV Display Ratio : 4:3 or 16:9
Movie Flip : 180 deg. rotation Movie Sound : off plus three volume levels
Max SD Card: 32 GB Micro SD Card (not included)
Can be used as a Dash Camera (Start / Stop Recording) Using Time: more than 80min
Dimension: 5 x 2.5 x 2.5 cm
Weight : 37g
Loop recording (5 min. clips with one sec. video overlap, so no lost video). Pressing the mode button while in Loop Record mode will make the current clip being recorded write protected so it will not get over written during looping. The file can be manually deleted, though.
Time lapse photos with delays between images. The targeted delay times range from 0.25 to 60 sec.
Recording LED toggle
Movie/photo time stamp toggle
Power on button delay (to prevent premature activation while handling)
Auto-record when power to the camera is applied (useful for car recorder use - no button presses needed.)
Charging on/off toggle when plugged into a USB data port (useful for some external USB devices)
TV out (PAL or NTSC), which will include a playback mode.
GUI program support for setting the parameters will be available.
Description: Model Number:0-150mm(0-6") vernier caliper Measuring range:0-150 mm / 0-6" Resolution:0.01mm/ 0.0005 inch Units mode:mm and inch Display:LCD Body material:stainless steel Max. measuring speed:1.5m/sec 100% Brand New 0-6" (0-150mm) LCD digital vernier caliper. Size:23.4 x 7.6 x 1.3 cm
Electronic Digital Vernier Caliper: Made of hardened stainless steel Base measuring function: Inside, outside, depth and step measuring Linear capacitive measuring system Zero setting in any position With a small locking thumb screw which locks the jaws in place Base measuring function: Inside, outside, depth and step measuring An ideal tool for a broad range of industrial measuring
1. Internal measuring jaws 2. METRIC/INCH change over 3. Locking screw 4. LCD display 5. External measuring jaws 6. Power of button 7. Zero setting and power on button 8. Battery cover 9. Depth measuring blade 10. Step-measuring faces
Specifications: Measuring range: 0~150 mm/ 0~6 inch. Resolution: 0.01mm/ 0.0005 in. Repeatability: 0.01mm/ 0.0005 in. Accuracy: + 0.02 mm/ 0.001 in. (<100 mm), + 0.03 mm/ 0.001 in. (>100 – 150 mm) Maximum measurement speed: 1m/s Power: 2 x 1.5V SR44 (silver oxide cell) battery (included) Battery life: 1 year for continuous usage / 3 years under normal operation
MAINTENANCE INSTRUCTIONS: 1. Clean caliper bar with dry cotton fabrics before using in order to avoid mad display of caliper caused by humidity, 2. Keep the caliper clean and dry (Liquid can damage the slider), 3. Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone and other organic solutions. 4. In order to save power, turn of the unit when caliper is going to stay idle for some time. 5. Never apply and electric pressure on any part of the caliper and never use an electric pen for the fear of damaging its chip. 6. For other notes please refer to the conventional calipers. 7. Accidental wrong display may happen while replacing the battery, just take outthe battery and the put it in again after more than 30 seconds until the display returns to normal
Sensor: 1/3 "CMOS Lens: 900TVL Lens Angle: 110 ° FOV horizontal viewing angle of 140 ° DFOV diagonal perspective 68 ° FOVvertical viewing angle Format: NTSC / PAL (switchable) Resolution: PAL: 960x576 NTSC: 960x480 Power consumption: 100mA @ 12V Power: 3-26V (Connect the booster module to support the voltage bellow 4.8V) Lens Mirror Diameter: F=2.9mm f=6.72mm
Support video format: NTSC / PAL Output Impedance: Antenna 50Ω , Signal 75Ω Output signal strength: 13±1dbmdBm or 23±1dbmdBm Output Power: 25mW or 200mw (Switchable) Wireless Channel: 40CH Antenna: RHCP circular polarization clover leaf antenna Operating voltage: 3-26V (Connect the booster module to support the voltage bellow 4.8V) Current: 100mA Audio carrier: 6.5MHz
Frequency Band A
Frequency Band B
Frequency Band E
Frequency Band F
Frequency Band R
Weight: 9.9g Size: 23*20*12.8mm (without antenna)
Feature: AIO FPV camera, transmitter , atnenna all 3 functions in one limit size and weight 110 ° FOV horizontal viewing angle of 140 ° DFOV diagonal perspective 68 ° FOV vertical viewing angle Five bands 40 channels with Raceband Free switching between NTSC and PAL Output power 25mW or 200mW Switchable Nickel-plated 4 Leaf Antenna , RHCP circular polarization clover to Antirust and get strong signal Free switching horizontal viewing and vertical direction, the camera can install on any direction Select frequency channel by PWM Wide voltage input 3-26V, 100mA low current operation and power consumption Connect the booster module to support the voltage bellow 4.8V Support connect OSD with NAZE32/F3/CC3D flight controller, more details please click here.
Package Included: 1 X MC02 AIO FPV Camera 2 X Cable 1 X Boost module 5 X Battery connector 1 X User Manual