Menu
My Cart | Checkout

 
 
← Go Back

Tarot T-2D V2 Brushless Camera Gimbal ZYX22 Gyro TL68A00 For GoPro3

Tarot T-2D V2 Brushless Camera Gimbal ZYX22 Gyro TL68A00 For GoPro3
Tarot T-2D V2 Brushless Camera Gimbal ZYX22 Gyro TL68A00 For GoPro3

Price: $113.29

Buy Now Add to Cart

Overview:
Tarot T-2D gimbal is specially designed for Gopro Hero3 camera.Adopting 6061T6 aluminum alloy full CNC precision machining and brushless motor direct driving,it is easy to  instal.Even the aircraft is in high speed flight, it can still stabilize and control the Gopro camera precisely with the highest stability to achieve best camera performance.

Description:
Brand: Tarot
Item Name: Camera Gimbal TL68A00
Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working Current: 200mA-500mA (power supply voltage and the motor related)
Working Environment Temperature: minus 15 degree ~ 65 degree
Processor: Dual 32-bit high-speed ARM core processor
Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three
Maximum Angular Rate: 2000 degree / sec
Maximum Acceleration: 16g
Control Frequency: 2000Hz
Motor Drive Frequency: 20KHz (no noise smoothing driven)
Control Accuracy: 0.1 degree
Control Angle Range: -45 degree ~ 45 degree (roll), -135 degree ~ 90 degree (tilt)
Pose Solver Algorithms: PTZ dedicated brushless motor decoupled EKF algorithm
Shooting Equipment: GOPRO Hero compatible
Support Remote Devices: PPM/PCM/2.4G
Support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
Weight:195g

Features:
Support GOPRO Hero3 video auxiliary output
Support the supply voltage polarity protection and voltage compensation
Support the motor drive end short-circuit protection
Support for custom initial pitch angle
Support sensitivity parameter adjustment and software 3D pose show
The support rocker rate mode and position mode

Related Spare Part :
Head hanging hook TL68A01
GOPRO camera fasteners TL68A02
GOPRO brushless PTZ camera frame assembly TL68A03
GOPRO head roll arm TL68A04
GOPRO PTZ stand arm motor base TL68A05
GOPRO brushless motor TL68A06 PTZ
GOPRO two axes PTZ shock group TL68A07
GOPRO brushless pan rack assembly TL68A08
GOPRO head roll axis brushless motor TL8A09
GOPRO AV video output cable TL68A10
GOPRO PTZ suspension ball TL68A11
GOPRO two-axis gyroscope ZYX22 PTZ

Package Included:
1 x Camera Mount 

1 x board
2 x motor
1 x gyro
1 x wire set
1 x screw set




Others Also Viewed these Popular Items...View All Products

Cheerson CX-10A CX10A Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Cheerson CX-10A CX10A Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Description:
Item name: Cheerson CX-10A Headless Mode RC Quadcopter
Frequency: 2.4G    
Gyro: 6 axis
Product size: 40*40*22mm
Quadcopter weight: about 12g
Diameter of blade: 30mm
Product battery: 3.7V 100MAH
Remote battery: 2XAAA dry battery
Charging time: 30mins
Flying time: about 5mins
R/C distance: about 20m             
Flying distance: about 20m            
Color: black,white,silver,golden
Certificates: CE,ROHS,EN71, EN62115,R&TTE,ASTM,HR4040

Features:    
With Headless Mode,no need to adjust the position of aircraft before flying        
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and throw to fly             
It has 6-axis gyro which can have more stable flying and be easy to control             
It has 3 speeds with high, middle and low. It can be self-adjusting which is easier for new players to handle.             
Left rotation, right rotation, hover                         
It can realize 3D tumbling in four directions with 4 LED lights.             
Battery protection             

Package Included:
1 x Cheerson CX-10A RC Quadcopter
1 x 2.4G transmitter
1 x USB cable
2 x Blades
1 x Manual

Read More


Price: $18.25

Buy Now Add to Cart

Eachine 800tvl CCD 148 Degree FPV Camera Lens w/ 5.8G 600mW Transmitter

Eachine 800tvl CCD 148 Degree FPV Camera Lens w/ 5.8G 600mW Transmitter

Specification of Camera:
Item Brand:Eachine
Item Name :800tvl CCD 148 Degree FPV Camera Lens w/ 5.8G 600mW Transmitter
FOV:148°
Power Supply: 3.6-5.5V(powered  by image transmission)
Current: 60mA @5V
Sensor: 1/3” CCD Over 800TVL
Type:PAL / NTSC (NOT free switch)
Resolution: 800TVL
Operating temperature: -20° C - 70° C
Camera Size: 32 X 32 X 23.5mm
 Lens Size(Length x Diameter): 15.3mm X 14mm
Lens: 2.6mm IR coated 
Weight: 12g

Specification of Transmission:
Modulation Mode: FM
Supported Video Format: NTSC/PAL
Output  Impedance: 75 Ohm
Output Signal Strength: 27~28dBm.
Output Power: 600mW
Operating Channel: 32CH
Operating Voltage: 7V - 24V
Operating Current: 190mA
Video Band Width:6.5 MHz
Antenna Connector: RP-SMA 
Size: 38mm x 22.5mm x 6mm
Weight: 6g(without antenna)


                                                Frequency Table
Frequency Band A 5865 5845 5825 5805 5785 5765 5745 5725
Frequency Band B 5733 5752 5711 5790 5809 5828 5847 5866
Frequency Band E 5705 5685 5665 5645 5885 5905 5925 5945
Frequency Band F 5740 5760 5780 5800 5820 5840 5860 5880


Features:
- FOV: 160°diagonal 148°horizontal (ideal for fixed camera)
- With 1/3' CCD sensor
- With lens cap,well protecting the lens
- Performance rivals Cmos. Nice quality low cost. 
- Evening low light performance as excellent as highlight during the day
- Imaging parameters and the wide angle rigorous debugging  for FPV
- Special cable connected the camera to image transmission,very convenient and concise
- Super lightweight,ultra-low power consumption,suitable for RC multicopter
- Can be mounted on frame,compatible with most of the 250mm frame
- Image settings have been FPV tuned through hours of flight testing to ensure great performance in challenging lighting conditions (no problem to fly in low afternoon sunlight). 
- Low power and light weight make this camera a perfect choice for smaller aircraft. Come with tiny 600mW 32ch FPV professional video transmitters.
- Compatible with ImmersionRC Boscam, Foxtech and other generic brand FPV receivers within the same frequency range.

Package Included:
1x Eachine 800TVL camera
1x 5.8G image transmission 
1x Antenna(2db)
1x 5P Cable
1x Manual

Read More


Price: $43.99

Buy Now Add to Cart

4X Chaoli CL-615 6x15mm Coreless Motor for 90mm-130mm DIY Micro FPV Quadcopter Frame Blade Inductrix

4X Chaoli CL-615 6x15mm Coreless Motor for 90mm-130mm DIY Micro FPV Quadcopter Frame Blade Inductrix

Description:
Motor Diameter: 6mm
Motor Length: 15mm
Shaft Diameter: 1.0mm
Cable Length: 60mm
Weight: about 1.8g
Motor wire: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
Option: With 1.25mm JST plug
Quantity: 4 pcs (2 CW and 2 CCW)

Read More


Price: $9.89

Buy Now Add to Cart

Eachine H8 Mini Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Eachine H8 Mini Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Description:
Item name: Eachine H8 Mini RC Quadcopter
Frequency: 2.4G    
Gyro: 6 axis
Product size: 13.5*13.5*2.8cm
Package size: 14.5*7.8*13.5cm
Quadcopter weight: about 20g
Product battery: 3.7V 150MAH(Included)
Remote battery: 3 x AAA dry battery(Not included)
Charging time: 45mins
Flying time: 5-7mins
R/C distance: about 30m             
Flying distance: about 30m            
Color: black,white

Features:    
With Headless Mode,no need to adjust the position of aircraft before flying .
One key to return function makes it easily to find the way home.
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°  
It has 6-axis gyro which can have more stable flying and be easy to control                          
It can realize 3D tumbling in four directions with 4 LED lights. 
Lightweight airframe with nice durability
Battery protection             

Eachine H8 Mini Quadcopter Manual 

Package Included:
1 x H8 Mini RC Quadcopter
1 x 3.7V 150MAH battery
1 x Transmitter
1 x USB cable
2 x Replacement Props (A & B)
4 x Soft Foam Landing Cushions
1 x Screwdriver
1 x Manual

Read More


Price: $14.29

Buy Now Add to Cart