Eachine 700TVL 1/3 Cmos FPV 110 Degree Camera w/32CH Transmission
Description: Brand Name: Eachine Item NO.:F01 Item Name: 700TVL 110 degree Camera module with transmitter
Specification of Camera: Lens: 2.6mm IR coated FOV: 127°diagonal 110°horizontal (ideal for fixed camera) Power Supply: 3.6-5.5V(powered by image transmission) Type:PAL / NTSC(free switch) Current: 60mA@11.1V Sensor: 1/3” CMOS Resolution: 700TVL Operating temperature: -20° C - 70° C Camera Size: 32 X 32 X 23.5mm Lens Size(Length x Diameter): 15.3mm X 14mm Weight: 12g Usage:Compatible with general 5.8G transmitter
Specification of Image Transmission: Item NO.: ET200 Modulation Mode: FM Supported Video Format: NTSC/PAL Output Impedance: 50 Ohm Output Signal Strength: 23~24dBm. Output Power: 200mW Operating Channel: 32CH Operating Voltage: 7V - 24V Operating Current: 190mA Operating Temperature: -10~85 Video Band Width: 0~8.0 MHz Video Input Level: 0.8~1.2 Vp-p Video Input Impedance: 75 Ohm Audio Input Level: 0.5~2.0 Vp-p Audio Input Impedance: 10K Ohm Sound Carrier: 6.5MHz Transmitter Connector: optional RP-SMA female (antenna connector: RP-SMA male) and SMA female (antenna connector: SMA male) Size: 38mm x 22.5mm x 6mm Weight: 6g(without antenna) Transmitter frequency: 5645-5945MHz with 200mW power output Transmitting distance > ~1500m (open area) Note: This Eachine 700TVL 1/3 Cmos FPV 110 Degree Camera supports 11.1V and the 32CH Transmission supports 7V - 24V. After testing, both of them in 11.1V will be the best if used as a set.
Features: - With 1/3' CMOS sensor - With lens cap,well protecting the lens - Performance rivals CCD. Nice quality low cost. - Evening low light performance as excellent as highlight during the day - Imaging parameters and the wide angle rigorous debugging for FPV - Special cable connected the camera to image transmission,very convenient and concise - Super lightweight,ultra-low power consumption,suitable for RC multicopter - Can be mounted on frame,compatible with most of the 250mm frame - Image settings have been FPV tuned through hours of flight testing to ensure great performance in challenging lighting conditions (no problem to fly in low afternoon sunlight). - Low power and light weight make this camera a perfect choice for smaller aircraft. Come with tiny 200mW 32ch FPV professional video transmitters. - Compatible with ImmersionRC Boscam, Foxtech and other generic brand FPV receivers within the same frequency range.
The Talon FPV V-tail Drone is an all EPO moulded airframe. The kit comes un-assembled with EPO and laser cut plywood parts. This version 2 of the Talon has strengthened plywood wing saddle/carbon support parts, and additional plywood pieces for easier FPV equipment mounting. Less guess work on your part. Also, the front wheel plywood mount has been strengthened to survive less than perfect arrivals better.
With a 4S 14.8V 10,000mAh LiPoly battery, flight times are long, and wing loading still low thanks to the generous wing area of the Talon. A generous fuselage compartment with large top hatch and removable nose bubble allows you to access your FPV equipment and flight battery in any configuration you choose. It is an open canvas for your FPV needs.
Features: - Kit - All assembly and equipment installation required - Moulded EPO airframe - Laser cut plywood motor mount and wing saddle frame - Version 2 Talon features strengthened ply parts and improved equipment mounting options - Removable nose bubble for quick access to camera equipement. - Large fuselage compartment accomodates many battery and FPV equipement configurations. - Two Piece plug-in wings with carbon wing tube - Detachable outrigger wheels