Menu
My Cart | Checkout

 
 


Check Out Our Newest Additions...View All Products

GT Power Helicopter Servo Test Adjustor with CCPM Tester

GT Power Helicopter Servo Test Adjustor with CCPM Tester

Description:

Input voltage: DC4.8-6V
Dimensions: 48 x 42 x 17mm
Weight: 31.5 g

Aluminum alloy, anodized. Designed for testing analog and digital servos, ESC controlled, and it can simultaneously test three servos if they are synchronized (This feature is mainly used in model helicopters CCPM servos)

It has three ways of check servos or ESC:

1. Manual mode: turn the knob to view the servo speed of response.
2. Neutral mode: Test servo neutral point.
3. Automatic "wiper" mode: The maximum steering angle of the test and swing back and forth.

It can connect 1-3 servos simultaneously and test them consistency.
It can also connect 1-3 ESC to test and compare their reaction time respectively.
It can connect 3 servos of the CCPM helicopters and select servos.
It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

Package Includes:

 1 x GT Power Helicopter Servos Test Adjustor

Read More


Price: $12.09

Buy Now Add to Cart

G.T.POWER RC Micro Digital Tachometer LCD for 2-9 Blade

G.T.POWER RC Micro Digital Tachometer LCD for 2-9 Blade

Description:

Weight: 39g
Dimension: 90x54x16mm
Manufacturers ID: GTPRPM
Working Way:  photo electricity
Max.Indication: 99999
Display: LED
Blade: 2-9
Auto Turn Off: no signal for 1min
Backlight Color: blue
Battery: 220mah replaceable lithium battery
Function:To measure RPM of a spinning propeller,2-9 blades ones,memorize peak RPM datas.

Feature:

1.Compact and extremely portable
2.220 mah removable lithium button battery included
3.Sharp backlit LCD screen. Viewable even under poor light condition
4.Automatically shutoff when signals are not detected within one minute

Package Included:

1 x G.T.POWER RC Micro Digital Tachometer LCD for 2-9 Blade

Read More


Price: $17.59

Buy Now Add to Cart

CTM Tool Portable Magnetizer Demagnetizer for Screwdriver RC Accessory

CTM Tool Portable Magnetizer Demagnetizer for Screwdriver RC Accessory

Description:
Color: blue
Dimension: 52*50*28mm

Weight: 70g


Feature:

magnetizing screwdriver tips or just about anything else

It can also be used to demagnetize tools or parts you do not want magnetized 

No batteries or electrical required, portable and easy to use.

Usage:
While awkwardly making a pick up onthe screws, just inser the screwdriver the " + " marked endto give a magnetized that the screws can be easily to pick up.

While repairin the electric appliances and electronic component & partssiply the screwdrive tip into the " - " marked end to give a demgnetized instantly

Package Includes:
1 x Magnetizer Demagnetizer for Screwdriver 

Read More


Price: $4.06

Buy Now Add to Cart

Mini Servo Tester 4.8V to 6.0V STV2.3 BEC Tester

Mini Servo Tester 4.8V to 6.0V STV2.3 BEC Tester

Description:

Size: 23.5×42×28mm.
Weight: 8g (0.28 oz)
Input: DC 4.8 to 6.0V
Output signal: 1.5ms±0.5ms
Adjustment methods: manual, neutral, automatic.

Features:

1.A must have for all RC hobbies, allows the user to test and exercise servos and set up a model without requiring the use of a transmitter and receiver.
2.The Servo Tester allows the user to control a servo directly, to determine its neutral position and to cycle it automatically for break-in and testing.
3.The Servo Tester offers small size, low power, high reliability and easy operation.
4.It is easy to use, practical and can test most parameters that interest users.
5.Controlled by an SCM, it has good stability and high accuracy.
6.The Servo Tester is adaptable to different power sources, it can use a four-cell dry battery, NiCd or NiMH pack,or it can be connected directly to a UBEC or ESC.

Color may vary, randomly sent

Package Includes:

1 x Servo Tester

Read More


Price: $6.15

Buy Now Add to Cart



See the Most Popular Items...View All Products

Cheerson CX20 CX-20 Open-source Version Auto-Pathfinder Quadcopter RTF

Cheerson CX20 CX-20 Open-source Version Auto-Pathfinder Quadcopter RTF
Features:

Attractive and highly integrated design A compact and highly integrated design means that it is easier for you to pack it into your backpack. The streamlined design brilliantly reflects the aesthetics of its industrial design and the fantastic visual effects allows you to become the focus of the crowd. Moreover, you can mount a GoPro or other light and handy cameras on your Auto-Pathfinder to shoot some footage from the air which will bring you a brand new travel experience.

Read to fly design The hardware mounting and software tuning are all done prior to delivery. The Auto-Pathfinder is ready to fly the moment you unpack it, you just need to attach propellors, charge the LiPo and install the transmitter batteries before use.

Contains remote control unit.(Just add 4 x AA batteries) Auto-Pathfinder contains a remote controller and receiver, which help the user to completely avoid the inconvenience of purchasing such things. The only thing you need to do is to add TX batteries (4x AA dry cell). The 2.4 G ISM frequency makes the effective control distance up to 300 meters (can be impacted by the specific flight environment). The frequency hopping anti-interference design allows multiple remote controllers to work at the same time, and provides a reliable remote communications link.

Stable,yet agile performance,easy to fly Auto-Pathfinder has an integrated flight dynamics system, the MX + GPS multi-rotor autopilot system, as well as the dedicated remote controller and receiver. Flight parameters and functions have been setup before delivery, so you can fly your Auto-Pathfinder the moment you receive it. The proven stability of the MX autopilot system allows you to easily achieve great flight performance.

Two flight control modes,including position hold With the built-in MX autopilot system plus a GPS module, the Auto-Pathfinder has GPS Attitude and Attitude Control Mode. Pilots can switch between the two modes to achieve a particular flight experience.

Intelligent orientation control(IOC) Auto-Pathfinder also has the Intelligent Orientation Control (IOC) function of the MX autopilot system. Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor.

Failsafe & auto go home/landing Auto-Pathfinder also has the failsafe function of the MX autopilot system. This means when the communication between the Mx Controller and the transmitter is disconnected, the outputs of all command sticks from controller will go to the center position. If the GPS signal is good enough, the system will automatically trigger Return To Home and will land safely.

Low voltage protection Auto-Pathfinder also has two levels of low voltage protection, a function of the MX autopilot system. It prevents your multi-rotor from crashing or other harmful consequences caused by low battery voltage. In the first level of protection, the LED indicator blinks and makes a sound of Bi-Bi-Bi to warn you. In the second level protection the system will trigger the Auto-Pathfinder to land automatically.

Maximum flight speed 10m/s The maximum horizontal flight speed of the Auto-Pathfinder can reach 10m/s and the maximum vertical speed is 6 m/s. The perfect combination of speed and stability allows you to experience the glamour of Auto-Pathfi

nder. High intensity led lights,to aid orientation during flight Under each arm of the Auto-Pathfinder there are some high intensity LED indicators which are used to help you to see the orientation during flight.

Gopro camera mount(camera not included) Auto-Pathfinder has an external removable camera mount for you to mount light and handy cameras (GoPro for example) or other video shooting electronic equipment. It is very convenient for you to record your flight.

10 to 15 minutes of flight time Auto-Pathfinder includes a 3S LiPo battery (with the capacity of 2700mAh, weight only 180g) and a balance charger. With the all-in-one design and light airframe, the flying time could last 10 to 15 minutes which will give you a more extensive flight experience.
Read More


Price: $194.03

Buy Now Add to Cart

JJRC H18 Hexacopter 2.4G 4CH 6 Axis Gyro Headless Mode RTF

JJRC H18 Hexacopter 2.4G 4CH 6 Axis Gyro Headless Mode RTF

Description:
Brand name: JJRC
Item name: H18 Hexrcopter
Color: Black,orange
Material: ABS
Function: Forward/backward,left/right,up/down,left and right side fly,headless mode,roll
Frequency: 2.4G
Gyro: 6 Axis
Channel: 4CH
Battery: 3.7V 75mAh
Battery for transmitter: 2*1.5V AAA batteries(not included)
Flight time: 5-6mins
Charging time: 45mins
Control distance: 20m

Package Included:
1 x JJRC H18 2.4G 4CH 6 Axis Hexrcopter
1 x 2.4G transmitter
1 x 3.7V 75mAh battery
4 x Blades
1 x USB cable
1 x Manual

Read More


Price: $17.59

Buy Now Add to Cart

700TVL 1/3 2.1mm CCD FPV HD Ultralight Camera NTSC/PAL For FPV RC Multicopter

700TVL 1/3 2.1mm CCD FPV HD Ultralight Camera NTSC/PAL For FPV RC Multicopter

Description:

Item Name: 700TVL 2.1mm camera
Sensor: SONY Components Chip
Weight: 17g
Size: 31x30mm
Lens: 2.1mm
Total pixels: PAL: 1020H x 596V NTSC: 1020H x 508V

Effective Pixels: PAL 976H x 582V NTSC: 976H x 494V
Signal Type: PAL / NTSC
Resolution: 700TVL
Function: OSD menu control
Synchronization System: Internal
Light: 0.01lux / F1.2
Video Output: 1.0vp-p / 75ohm
Shutter: 1/50 (sec) to 1 / 100,000 (sec)
Operating voltage: DC12V (wide voltage, measured can 7.5-13V work)
Working Current: 70mA (low power)

Features:

Adapt to light changes very quickly, which is FPV flight, often we encounter nature in a variety of lighting conditions changing
Pace


Package Included:

1 x 700TVL  camera
1 x cable

Read More


Price: $14.29

Buy Now Add to Cart

JJRC H20C with 2MP Camera 2.4G 4CH 6Axis Headless Mode Nano Hexacopter RTF

JJRC H20C with 2MP Camera 2.4G 4CH 6Axis Headless Mode Nano Hexacopter RTF

Description:
Item name: JJRC H20C Nano Hexacopter 2.4G 4CH 6Axis Headless Mode with 2.0MP Camera 
Frequency: 2.4G
Channel: 4CH    
Gyro: 6 Axis
Quadcopter Size: 10.5 x 10 x 2cm
Package Size: 18 x 10 x 15cm
Product battery: 3.7V 280mAh(Included)
Remote battery: 3 x AAA dry battery(Not included)
Charging time: 45mins
Flying time: 5-6mins
R/C distance: about 60m             
Flying distance: about 60m            
Color: black and green,black and red
Camera: 2.0MP 720P

Features:    
With Headless Mode,no need to adjust the position of aircraft before flying .
One key to return function makes it easily to find the way home.
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°  
It has 6-axis gyro which can have more stable flying and be easy to control                          
It can realize 3D tumbling in four directions with 4 LED lights. 
Light weight airframe with nice durability
Battery protection
With 2.0MP 720P camera can Video/Photograph            

Package Included:
1 x JJRC H20C mini quadcopter with camera 
1 x 3.7V 280mAh battery
1 x Transmitter
1 x USB cable
1 x Screwdriver
6 x Propeller

1 x Manual

Read More


Price: $35.19

Buy Now Add to Cart